Many friends will ask whether the electric drum needs anti-corrosion work. In fact, the main material of electric drum is metal. If there is a common problem with metal, it will be corroded. Next, let's take a look at the electric drum. If not maintained in a timely manner, rust will occur, affecting the operation of the machine. After forming, it needs to be rust proof, corrosion-resistant, wear-resistant, and supported.
1.Before using the electric drum, we should check whether the lubricating oil is clean and replace it regularly.
2.During the scrubbing process, be sure to wring out the cloth and do not wet it. Wipe it on the top of the drum.
3. The production of electric rollers mainly includes initial turning of the roller body, initial static balance calibration, interference fit assembly and welding of the shaft head, precision turning, and precision dynamic balance calibration. If the tolerance requirements for roundness, cylindricity, straightness and other behaviors are below 0.2 mm, it is necessary to use an external cylindrical grinder or rolling mill for grinding after finishing. If surface hardness is required, additional heat treatment procedures are needed.
4. Do not expose it to sunlight and rainwater, otherwise it will not only rust, but also have a significant impact on the product's lifespan. The entire equipment of the electric drum is made of metal.
In fact, even if the electric drum is treated with anti-corrosion, the anti-corrosion layer will be corroded over time. Therefore, as long as it is a metal product, anti-corrosion work should be done. In order to extend the service life, we should do a good job of regular maintenance and not leave the equipment in damp places for a long time.
Language
