During the operation of the electric drum, it is necessary to add a certain amount of lubricating oil for lubrication, because only when the oil is in place and the lubrication level is sufficient, can the equipment proceed smoothly. However, its oil is not like what everyone adds. We all know that there are various types and models of lubricants, and the lubrication effect of each type of oil is different, requiring certain standards. So, what oil is suitable for adding to an electric drum? Now, let me introduce it to you.
1. Electric drum is a high-power device, so we usually use ordinary N46 engine oil. Before leaving the factory, after 2 hours of no-load operation, the cooling oil of the drum will be discharged and leave the factory in an oil-free state. In order to avoid accidents, before using the electric drum, the staff should add appropriate oil in the equipment introduction and instructions to prevent the drum from being damaged.
2. We usually use N32 turbine oil as well. Due to the high requirements for stain cleanliness and oil quality of electric rollers, cooling oil has been added before leaving the factory, and the roller body has been sealed, so there is no need to add oil during use.
After the customer bought a new electric drum, everyone wants to use it for a long time. However, some people may doubt whether the equipment has been operated correctly and maintained in a timely manner, and the efficiency of the equipment is still not high. At this point, it can be considered whether the lubricating oil added to the equipment is incorrect. In addition to daily maintenance, everyone should also regularly check the quantity and quality of the cooling oil for the electric drum. When the oil level is insufficient, it should be replenished in a timely manner. When the quality of the oil decreases or reaches the oil change period, the oil should be replaced in a timely manner. Only in this way can the equipment operate better.
Due to the external motor, the failure rate of the electric drum is greatly reduced, and it is easy to install, disassemble, and maintain. Due to the improved heat dissipation conditions of the motor, it is suitable for the selection of small bandwidth, high power, and shell encapsulation requirements. Multiple deceleration mechanisms are used, with an efficiency of over 85%. It adopts a planetary cycloidal reduction mechanism internally, which exposes the motor and directly connects it with the drum, with high load-bearing capacity and strong overload capacity.
The above is the suitable oil for electric drum. This equipment serves as the power source for belt conveyors and lifting devices, and is widely used in sectors such as mining, metallurgy, chemical industry, coal, building materials, electricity, grain, and transportation.
Editor: Chihiro
Language
