Company News, Product News-Zibo Machinery Factory

Current locations : Home >>News

Solution to dampness in gearbox
If the gearbox is left for too long, it is easy to get damp. What should we do if the gearbox gets damp? Today, the editor will give you some tips!
【2020/04/03】
Surface damage treatment and usage techniques for reducers
The surface of the gearbox is easily damaged, so what should we do if there is damage? What are the techniques for using it? Let's have a brief understanding of the gearbox below:
【2020/03/31】
A Brief Discussion on the Classification of Gearboxes
There are many types of reducers with different models, and each type has different uses. So what is its classification like? The following are commonly used classifications of reducers:
【2020/03/28】
Why use a gearbox?
With the further development of China's machinery industry, more and more users are using reducers, although the widespread application of reducers in many mechanical equipment has been widely recognized. But there are still many users who are not ve...
【2020/03/25】
The correct usage method of the reducer during the running in period
After the reducer leaves the factory, it has a running in period of about 200 hours based on its initial characteristics. The purpose of the running in period is to ensure the normal operation of the gearbox and reduce the failure rate. However, curr...
【2020/03/20】
How to choose lubricating oil for reducer
When the reducer is running, in addition to the good effect of using various parts together, the use of different lubricating oils can also affect the use effect. Even if the difference in lubricating oils used is significant, it can also affect the ...
【2020/03/20】
The reason for the wear of the gears in the reducer
The gears in the gearbox play a significant role during use, but there may be serious wear and tear during subsequent use. So, let's analyze the reasons for gear wear.
【2020/03/04】
Methods for improving the service life of reducers
Gearboxes will experience wear and tear during normal use, and the impact of load operation on their lifespan is often significant, especially when used in environments that may generate excessive loads and even cause gear breakage. Therefore, method...
【2020/02/22】
Precautions for lubricating bearings when using reducers
As we all know from the previous article, regular maintenance is required for the gearbox equipment, and at this time, we often need to use lubricants; For the lubrication of equipment rolling bearings, we often use two types of lubricants: lubricati...
【2020/01/28】
How to calculate the speed ratio of the gearbox
Gearboxes have become common in our daily lives, which is closely related to their excellent performance characteristics and product advantages; Do you know anything about the speed ratio of this device? Today, let me teach you the method of calculat...
【2020/01/22】

122 Records Previous Index 6 7 8910 Next Total 13 page Last